Wrought Iron and Ornamental Fence Installation in El Paso, TX (Who Actually Call You Back)
Open bars, a clear boundary and the view you keep, planned on your lot.
✔ Free estimates
✔ On-site from start to finish
✔ Priority warranty scheduling
Open Monday to Saturday, 7am-7pm
Fully insured
Free Estimate
A Clear Boundary That Keeps Your View
Get a yard with a clear boundary and the view kept open. Open bars mark your line, and a baked-on powder coat means no painting.
At Everock Fencing in El Paso, TX, we build ornamental fences and entrance gates for homes in El Paso, Horizon City and across El Paso County. We plan the style, the height and the gates with you before the first post goes in.
Why Some Iron Fences Lose Their Finish
You want crisp bars and a gate that swings true. Every ornamental fence starts that way. Then a chip in the coating leaves bare steel, and rust starts from that spot.
A gate hung on a light post sags first. Once the latch misses, the whole entrance looks tired.
Settle it at the start and the fence goes up once. We set posts in concrete, hang gates on heavy hinges and show you how to spot a chip early.
Why Choose Wrought Iron
You keep your view
Open bars let you see out. Nothing blocks the mountains or the yard.
You skip painting
The finish is a baked-on powder coat. A rinse with a hose clears the dust.
Your entrance looks finished
Gates and bars match, so the entry looks planned. Picket tops and scrolls are part of the style choice.
Wind passes through
Open bars do not catch gusts like a solid wall. At Everock Fencing we set the posts in concrete, so the line holds in spring wind.

Services That Go With an Ornamental Fence
Built for El Paso Sun and Wind
Rain is scarce here, under 10 inches a year, and summer highs reach the upper 90s. A baked-on powder coat is made for outdoor sun. Open bars let spring wind pass instead of catching it.
You choose the metal for the job. Steel is strong and heavy, a fit for long runs and large gates. Aluminum is lighter and does not rust, a fit for pool areas and front yard edges.
From First Call to Finished Fence
Three steps, in this order. Nothing is hidden, and nothing starts until you approve the plan.
- You get in touch. Send the short form or call. We can call you back and ask a few questions first, so we know what you want to fence and where. Estimates are always free.
- We visit and quote. We walk your lot with you, measure each run and mark the gate spots. You choose the style, the height and the metal, and you see the itemized quote.
- We build, you approve. We check the layout against El Paso’s height rules and request the Texas811 locate. Then we set the posts in concrete and fasten the panels to them. Gates go on last, and we tidy the work area when we finish.
What the Job Covers From Start to Finish
Layout with you. We walk your lot, measure each run and mark the gates before any hole is dug.
Rules and lines. We check the layout against El Paso’s height rules and request the Texas811 locate. That call does not mark private lines such as sprinklers, so you point those out on the visit.
Posts and footings. Posts go in concrete footings sized to the height and the ground. The footings cure before the panels go on.
Panels. Panels are fastened to the posts and set level along the run. Bar spacing follows the style you chose.
Gates. Gates hang on braced frames with heavy hinges and a latch that lines up.
Four Ornamental Styles for El Paso Yards
Four looks cover most El Paso yards. Each one answers a different question: how plain, how decorative and how grand the entrance should feel.
Flat top. Clean, straight bars with a level top edge. It suits a modern house and a simple line.
Picket top. Pointed tops give the fence a classic look and a finished edge.
Decorative scrolls. Curls and rings add detail to panels and gates. They work best at the front of the house.
Entrance gates. Single or double gates that match the fence. They make the entry the focus of the front yard.
Every style comes in powder-coated steel or aluminum. We show you both on the walk and explain what changes the price.
What Goes Into an Ornamental Fence
An ornamental fence is only as good as its parts and how they fit. At Everock Fencing we choose each part for the job.
Posts.
They carry the whole fence, so we set them in concrete footings and size the depth to the height and the ground.
Panels.
Panels carry the bars between the posts. We space posts to the panel width so every panel sits level.
Bars.
Bars set the spacing and the style. Close spacing keeps small pets in and gives the fence a fuller look.
Powder coat.
The coat protects the metal and sets the color. It is baked on, so there is no brush work to repeat.
Gates and hinges.
Gates take the most strain on any fence. We hang them on heavy hinges in a braced frame, with a latch that lines up.
El Paso Fence Rules for Open Fences
Plan to El Paso’s rules from day one and your fence goes up once. The city treats each part of your yard differently, and we check your address before we build.
Taller, if it stays open. The city allows a fence to rise above the standard height limit, up to 10 feet, when the part above the limit is at least 75 percent open. Wrought iron fits that description, so an open ornamental fence can give you more height than a solid one without closing the view.
Standard limits. Behind the front of the house, the standard limit is 8 feet. In front of the house, it is 42 inches.
Clear corners. Within 20 feet of a street corner, a fence stays at 36 inches so drivers can see.
Lines marked before the first hole. Texas811 marks public utility lines for free. The call goes in at least two business days before digging.
HOA rules sorted early. If your neighborhood has an HOA, its rules come on top of the city’s. We sort that paperwork with you before we build.
Your lot decides the rules. El Paso’s rules apply inside the city. A lot in a nearby town such as Horizon City or Socorro follows the rules of that town or the county, so your layout starts with where your lot sits.
Fence Installation in El Paso and the Towns Around It
You get the same visit whether your lot is in El Paso or out toward Horizon City, Socorro, San Elizario, Canutillo or Anthony. Tell us where the lot sits, and we start with the rules for that address.
Five Habits That Keep the Finish Sharp
You can keep your ornamental fence looking new with five simple habits. Each one takes minutes.
Rinse off the dust. A hose after a dusty spring clears the grit from the bars.
Check the coating. Wash with mild soap and water. Look for a chip, because bare metal is where rust starts on steel.
Test the gate latch. Open the gate, let go and watch that the latch catches. Check that the hinges swing freely.
Look for bent panels. A vehicle or a fallen limb can bend a section. We replace the damaged run and keep the rest.
Aim sprinklers away. Keep water from soaking the base of the bars. Dry metal lasts longer than wet metal.
Price Drivers for an Ornamental Fence
Length and height set most of the price. Steel or aluminum and the style of the bars come next. After that it comes down to the site: slope, hard digging, the number and width of gates, and whether an old fence has to come out first.
Estimates are always free.
You pay nothing to see what the job involves. Have three things ready: where the gates go, the height you want and the style you like.
Wrought Iron Against Chain Link and Wood
| What matters | Wrought iron | Chain link | Wood |
|---|---|---|---|
| Privacy | None on its own | Open, slats add cover | Full with board on board |
| View | Open | Open | Closed or partly open |
| Upkeep | Rinse, watch the coating | Check ties and coating | Stain and sealer on a schedule |
| Wind | Wind passes through | Wind passes through | Solid boards catch wind, so posts matter |
| Repair | Replace a panel | Replace a section of mesh | Replace single boards or rails |
| Look | Polished, many top styles | Plain, black coating blends in | Natural, stain in many shades |
Pick wrought iron for a polished boundary that keeps the view. Pick chain link for an open boundary on a tighter budget or acreage. Pick wood for privacy.
If Something Needs Fixing
You approve the layout, the height and the gate spots before the first post goes in. After that, the work is ours to get right.
After we build your fence, any fix goes to the front of the schedule. You’re booked first. If the problem is the installation, we fix it.
Other Fences We Build
Wrought Iron Fence Installation Around El Paso
You get a crew that builds wrought iron fences in El Paso and the towns around it. Lots outside the city limits follow different rules, so each job starts with where your lot sits.
All Areas We Serve
FAQs
Can a wrought iron fence be taller than the standard limit?
Yes, up to 10 feet, when the part above the limit is at least 75 percent open and corner visibility stays clear.
Does wrought iron need paint?
No. The powder coat is baked on. Look for chips and tell us early.
Is steel or aluminum better?
Steel suits long runs and large gates. Aluminum is lighter and does not rust. We help you pick on the walk.
Can wrought iron work around a pool?
Yes, when the bars are spaced so no opening lets a 4-inch ball through. The gate must open outward, close on its own and latch on its own.
How tall can a fence be in front of my house?
The standard limit in front of the house is 42 inches. Behind the front of the house it is 8 feet. We check your address first.
Who calls before digging?
We do. Texas811 needs at least two business days of notice, and getting the lines marked is free.
Do I need my neighbor’s approval?
For a wall on the shared property line, the city asks for written approval from the adjoining owner. A fence set entirely on your side of the line avoids that step.
Do you build outside the El Paso city limits?
Yes. We build across El Paso County. The town or county where your lot sits sets the fence rules there, so we check them before the build.
Do you charge for estimates?
No. Estimates are always free.
See the Whole Job Before You Pick a Style
Walk your lot with us and see the whole job before you decide. We measure the runs, mark the gates and talk through the style and height with you. Your estimate is free, and you leave with a clear plan for your fence.




