Privacy Fence Installation in El Paso, TX (Who Actually Call You Back)
A yard nobody can see into, with the height planned for each side of your lot.
✔ Free estimates
✔ On-site from start to finish
✔ Priority warranty scheduling
Open Monday to Saturday, 7am-7pm
Fully insured
Free Estimate
Close the View Where You Want Quiet
Get a yard that feels like yours. A privacy fence closes the view from the street and the next window, and you decide how tall it goes and where it stays low.
At Everock Fencing in El Paso, TX, we build privacy fences for homes in El Paso, Horizon City and across El Paso County. We plan the sight lines, the height and the gates with you before the first post goes in.
Why Some Privacy Fences Still Leave You Seen
You want a yard nobody can see into. Every privacy fence starts with that goal. Then the plan meets the city’s height rules, and a tall run in front of the house has to come down to size.
Gaps are the other weak spot. A slit between boards or a gate hung off line brings the view right back.
Settle both at the start and the fence goes up once. We plan the height for each side of your lot, set posts in concrete and fasten panels with no gaps.
Why Choose a Privacy Fence
Your yard stays your own
Tight boards or panels close the view. Posts set in concrete keep the line straight.
Pets and kids stay in
A solid fence leaves no gaps to push through. Gates latch where you use them.
Your garden gets shelter
A solid line breaks the sun and the wind. Plants and seating areas sit behind it.
You choose the material
Wood, vinyl and stone all close the view. Each one has its own care and look, and Everock Fencing shows you all three on the walk.

Services That Go With a Privacy Fence
Built for El Paso Sun, Wind and Dust
Rain is scarce here, under 10 inches a year, and summer highs reach the upper 90s. Spring brings wind and dust. A solid fence meets that wind head on, so posts and footings carry the load. We set every post in concrete.
You choose how the finish handles the sun. Wood takes stain or sealer to hold its color. Vinyl needs only a rinse. Stone needs no finish at all.
From First Call to Finished Fence
Three steps, in this order. Nothing is hidden, and nothing starts until you approve the plan.
- You get in touch. Send the short form or call. We can call you back and ask a few questions first, so we know where you want privacy. Estimates are always free.
- We visit and quote. We walk your lot with you, mark where the view needs closing and measure each run. You choose the material, the height and the gate spots, and you see the itemized quote.
- We build, you approve. We check the layout against El Paso’s height rules and request the Texas811 locate. Then we set the posts in concrete and fasten the panels with no gaps. Gates go on last, and we tidy the work area when we finish.
What the Job Covers From Start to Finish
Layout with you. We walk your lot, mark where you want privacy and set the height for each side before any hole is dug.
Rules and lines. We check the layout against El Paso’s height rules and request the Texas811 locate. That call does not mark private lines such as sprinklers, so you point those out on the visit.
Posts and footings. Posts go in concrete footings sized to the height and the ground. The footings cure before the panels go on.
Panels or boards. They are fastened tight and level along the run, with no gaps for the view to come through.
Gates. Gates hang on braced frames with heavy hinges and a latch that lines up.
Pick the Material for Your Privacy Fence
The material decides the care, the look and the cost. Four choices cover most El Paso yards, and each has its own page.
Wood. A warm look and many styles. Stain or sealer keeps the color.
Vinyl. No painting or staining. A rinse keeps it clean.
Stone and masonry. A permanent solid wall that needs no finish.
Chain link with slats. Slats woven into the mesh add privacy, and you can add them later.
We show you each on the walk and explain what changes the price.
What Goes Into a Privacy Fence
A privacy fence is only as good as its parts and how they fit. At Everock Fencing we choose each part for the job.
Posts.
They carry the whole fence and take the wind, so we set them in concrete footings and size the depth to the height and the ground.
Panels or boards.
They close the view. We set them tight and level so no slit opens between them.
Rails.
Rails tie the panels to the posts and keep each run straight. We space them to the height of the fence.
Fasteners.
They hold every board or panel to the rails. We match them to the material, so they hold through heat and wind.
Gates and hinges.
Gates take the most strain on any fence. We hang them on heavy hinges in a braced frame, with a latch that lines up.
Tall at the Back, Low at the Street
Plan to El Paso’s rules from day one and your fence goes up once. The city sets a different height for each part of your yard, and we check your address before we build.
Tall privacy behind the house front. Behind the front of the house, a fence can reach 8 feet. That is where your sides and back get full privacy.
Low in front. In front of the house, the limit is 42 inches. A solid fence there stays short, so the privacy goes along the sides and back. A gate or a short return at the front corner links the two.
Clear corners. Within 20 feet of a street corner, a fence stays at 36 inches so drivers can see.
Neighbor approval on a shared line. For a wall built on the shared property line, the city asks for written approval from the adjoining owner. A fence set entirely on your side of the line avoids that step, so we mark the line with you first.
Stone over 6 feet. The city requires a masonry wall taller than 6 feet to be designed by a Texas registered engineer. A wall at 6 feet or lower avoids that step.
Lines marked before the first hole. Texas811 marks public utility lines for free. The call goes in at least two business days before digging.
Your lot decides the rules. El Paso’s rules apply inside the city. A lot in a nearby town such as Horizon City or Socorro follows the rules of that town or the county, and an HOA adds its own on top. Your layout starts with where your lot sits.
Privacy Fencing Across El Paso County
You get the same visit whether your lot is in El Paso or out toward Horizon City, Socorro, San Elizario, Canutillo or Anthony. Tell us where the lot sits, and we start with the rules for that address.
Five Habits That Keep a Privacy Fence Solid
You can keep your privacy fence tight and clean with five simple habits. Each one takes minutes.
Rinse off the dust. A hose after a dusty spring clears the grit from the panels.
Look for gaps. A board that shifts or a panel that loosens opens the view. Tell us early, and we replace the one piece.
Test the gate latch. Open the gate, let go and watch that the latch catches. Check that the hinges swing freely.
Refresh the finish. Wood takes stain or sealer on a schedule. Vinyl needs only a rinse, and stone needs nothing.
Aim sprinklers away. Keep water from soaking the base of the fence. A dry base lasts longer than a wet one.
Price Drivers for a Privacy Fence
Length and height set most of the price. Material comes next. After that it comes down to the site: slope, hard digging, the number and width of gates, and whether an old fence has to come out first.
Estimates are always free.
You pay nothing to see what the job involves. Have three things ready: where you want privacy, the height you want and the material you prefer.
Wood, Vinyl and Stone Side by Side
| What matters | Wood | Vinyl | Stone |
|---|---|---|---|
| Privacy | Full with tight boards | Full with solid panels | Full, solid courses |
| Upkeep | Stain or sealer on a schedule | Rinse | None for the finish, watch the mortar joints |
| Wind | Solid boards catch wind, so posts matter | Solid panels catch wind, so posts matter | Heavy footing carries the wall |
| Repair | Replace single boards or rails | Replace a panel | Repair the joint or the stone |
| Look | Natural, stain in many shades | Clean and uniform | Permanent stone or masonry |
| Over 6 feet | Within the height limit for your yard | Within the height limit for your yard | Needs a Texas registered engineer |
Pick wood for a warm look and many styles. Pick vinyl to skip the finish. Pick stone for a wall that stays.
If Something Needs Fixing
You approve the layout, the height and the gate spots before the first post goes in. After that, the work is ours to get right.
After we build your fence, any fix goes to the front of the schedule. You’re booked first. If the problem is the installation, we fix it.
Other Fences We Build
Privacy Fence Installation Around El Paso
You get a crew that builds privacy fences in El Paso and the towns around it. Lots outside the city limits follow different rules, so each job starts with where your lot sits.
All Areas We Serve
FAQs
How tall can a privacy fence be in El Paso?
Behind the front of the house, up to 8 feet. In front of the house, 42 inches. Near a street corner, 36 inches. We check your address first.
Can I have a tall fence in my front yard?
Not a solid one. The front yard limit is 42 inches, so privacy goes along the sides and back.
Do I need my neighbor’s approval?
For a wall on the shared property line, the city asks for written approval from the adjoining owner. A fence set entirely on your side of the line avoids that step.
Does a tall stone wall need an engineer?
Yes. The city requires a masonry wall taller than 6 feet to be designed by a Texas registered engineer.
Can chain link give me privacy?
Yes. Slats woven into the mesh add privacy, and you can add them after the fence is up.
Who calls before digging?
We do. Texas811 needs at least two business days of notice, and getting the lines marked is free.
Do you build outside the El Paso city limits?
Yes. We build across El Paso County. The town or county where your lot sits sets the fence rules there, so we check them before the build.
Do you charge for estimates?
No. Estimates are always free.
Walk the Yard Before You Pick a Material
Walk your lot with us and show us what you want hidden. We measure the runs, mark the gates and talk height and material. Your estimate is free, and you leave with a clear plan for your fence.




